The engineered metal content inside your clamps, protectors and completion tools — built to your drawings.
If you design and build subsea protection products or downhole completion tools, your value is in the engineering: the polymer bodies, the sealing geometry, the field-proven design. But every one of those products still relies on metal — the bolts that hold a clamp shut, the machined mandrel a protector sits on, the anchoring hardware that keeps it in place, the metal insert that takes the load.
Sourcing that metal content shouldn’t slow you down or inflate your cost. Keyfix makes those components to your specification — flexibly, in the batch sizes you actually need, with the certificates your sector demands.
Who we work with
We supply the metal content for manufacturers of:
- Umbilical, cable and control-line protectors — cross-coupling and mid-joint protectors, clamps and guards
- Subsea clamps and hang-off systems — umbilical, riser and flowline clamps, swivel and hang-off hardware
- Centralisers and casing / completion accessories — centraliser bodies, stop collars, cable protectors
- Bend restrictors, stiffeners and buoyancy modules — internal clamp bodies and anchoring hardware
- Downhole completion and well-construction tools — control-line clamps, splice clamps, protectors
If your product is mostly polymer or composite but still carries metal parts, you’re exactly who we build for.
What we supply
Custom metal components, made to your drawings — not an off-the-shelf catalogue:
- Fasteners — bolts, U-bolts, studs and duplex / stainless fastenings for clamp and hang-off assemblies
- Machined bodies and mandrels — the metal cores, wear joints and bases your protectors and clamps are built around
- Metal inserts, sleeves and bushings — load-bearing and wear components, including interchangeable sizes
- Anchoring and clamping hardware — ratchet / locking components, swivel parts and retention hardware
- Cages and structural metalwork — e.g. aluminium cages and frames for baskets and guards
- Centraliser and casing-accessory metalwork — bodies and hardware machined or forged to spec
Metal content, in the field
These are finished subsea and downhole products in service. Keyfix supplies the metal hardware in them — the bolts, studs, nuts, inserts, lifting eyes and machined parts — built to the manufacturer’s drawing. The polymer bodies stay the manufacturer’s own.




Customer case example
A manufacturer we supply — a UK-based subsea and downhole protection specialist — designs and builds polymer protection products for the oil & gas sector. The polymer body is their own IP, but almost every item still carries metal that has to be machined, forged or fastened to spec. Here’s where Keyfix fits across their product line:
| Product | Metal content Keyfix can supply |
|---|---|
| Riser protection system / cased wear joint | Machined mandrel and base, load-bearing metal inserts, sealing-interface hardware, fastening bolts |
| Umbilical / cross-coupling protector | Hinge pins, bolts and duplex fastenings, metal wear inserts |
| Centralising clamp | Clamp bolts and studs, plus interchangeable metal sleeve inserts to suit different pipe diameters |
| Junk basket | Bolted metal end caps and an aluminium cage / frame, machined to the customer’s design |
| Control-line clamp | Clamp-body hardware, bolts, and retention / locking metal parts |
Across the range, the customer keeps the design and the polymer; we supply the certified metal content around it — to drawing, in the batch size required, with material certificates on every part.
Materials, processes and finishes
We match the part to your service environment — not the other way round.
- Materials — carbon and alloy steel, 316 / duplex / super-duplex stainless, Inconel and Monel, aluminium, and titanium
- Processes — CNC machining, cold forging and precision metal stamping, all in-house, from prototype to repeat production
- Finishes — zinc and hot-dip galvanising, Dacromet, Ruspert, PTFE, black oxide and more, selected to your corrosion-resistance requirement
Whatever the seawater, chloride or downhole condition your product has to survive, we’ll specify the alloy and coating to suit.
Why manufacturers choose Keyfix
- Fully custom — we build to your drawing and material / standard spec. No forcing your design onto a stock part.
- Flexible and small-batch — from a single prototype to repeat runs, with no large minimum order. Project-driven, low-volume work is welcome.
- Cost advantage vs EU sourcing — meaningful savings against EU-made parts, without compromising on certified quality.
- Certified and traceable — ISO 9001 / IATF 16949 quality system, material certificates and full traceability on every batch.
- Cross-industry engineering — the same discipline we bring to automotive, machinery and electronics customers, applied to your energy-sector parts.
How it works
- Send a drawing and your material / standard requirement.
- We quote the machined, forged or stamped part — with the alloy, finish and certification you need.
- We produce and deliver — with material certificates and traceability, from first prototype to repeat batches.
Carrying the metal content yourself?
Send us one drawing and we’ll come back with an indicative quote. sales@keyfixpro.com · www.keyfixpro.com


